Main features of UPE:
Ultra-high Molecular Weight Polyethylene Board Antistatic Upe Board has good wear resistance, good low temperature resistance and impact resistance, self-lubrication, non-toxic, water resistance, chemical resistance, heat resistance is better than general PE, the disadvantage is low heat resistance (thermal deformation temperature), Poor processability, hardness, rigidity and toughness of the outer surface, creep resistance is not as good as general engineering plastics, and the expansion coefficient is too large. UHMWPE has poor fluidity and extremely high viscosity in the molten state. It is a rubber-like high-viscosity elastomer. In the early days, it could only be formed by pressing and sintering methods, and it could also be processed by extrusion, injection molding and blow molding. The mechanical properties are higher than that of ordinary high-density polyethylene. It has outstanding impact resistance, stress crack resistance, high temperature creep resistance, low friction coefficient, self-lubrication, excellent chemical corrosion resistance, fatigue resistance, noise damping, nuclear radiation resistance, etc.
Use temperature 100 ~ 120 ℃. Good cold resistance, can be used at -180 ℃. The product with a density of 0.935g/cm3 and a molecular weight of 8 million has a tensile strength at break of 40MPa, an elongation at break of 350%, a flexural modulus of elasticity of 600MPa, and the cantilever beam notched impact continuously. Abrasion amount (MPC method) 20mm.
Ultra-high Molecular Weight Polyethylene Board Antistatic Upe Board has many excellent properties, but such an excellent engineering plastic is rarely known about its existence. This is mainly due to insufficient research on the melt properties of ultra-high molecular weight polyethylene, and the processing methods are basically still lagging behind. Press-sintering process. In recent years, with the continuous development of ultra-high molecular weight polyethylene processing technology, its products have been successfully applied in many fields.
Dimensions
Plate thickness (H) x length (L) x width (W): 1mm – 150mm x 1000 / 1220mm x 2000 / 2440mm Other specifications can be customized
Bar diameter (Ф) x length (L): 10mm – 350mm x 1000mm Other specifications can be customized