Views: 9801 Author: Site Editor Publish Time: 2014-06-18 Origin: Site
The outrigger pad is composed of a plate-shaped pad body and a hand rope. The plate-shaped backing plate body is made of UHMW/HDPE polymer composite material.
The four-corner support of the PE polymer synthetic material backing plate is 60mm and the pressure is more than 15-18 tons/cm. It can be used normally in harsh environments, and it is better to bend without breaking when overloaded.
The hand rope is made of nylon material, and the end of the hand rope is embedded in the backing plate body for easy carrying and arrangement.
The outrigger pads pressed by ultra-high molecular weight polyethylene have stronger pressure bearing capacity, which can reach more than 30-45 tons/cm
| Length | 18 Inch | 18 Inch | 24 Inch | 24 Inch | 30 Inch | 30 Inch |
|---|---|---|---|---|---|---|
| Width | 18 Inch | 18 Inch | 24 Inch | 24 Inch | 30 Inch | 30 Inch |
| Thickness | 1.5 Inch | 1.5 Inch | 1.5 Inch | 1.5 Inch | 2 Inch | 2 Inch |
| Vertical Load | 55,000 Lbs | 55,000 Lbs | 60,000 Lbs | 60,000 Lbs | 65,000 lbs | 65,000 lbs |
| Crushing Rating | 200 PSI | 200 PSI | 200 PSI | 200 PSI | 200 PSI | 200 PSI |
| Weight | 17 lbs | 17 lbs | 30 lbs | 30 lbs | 63 lbs | 63 lbs |
| Waterproof and Chemicals Resistant | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Material | High Density Polyethylene | High Density Polyethylene | High Density Polyethylene | High Density Polyethylene | High Density Polyethylene | High Density Polyethylene |
| Color | Black | Black | Black | Black | Black | Black |
